Installation Facts of an Electric Bike Conversion Kit

February 27th, 2009 Pete Posted in Articles | No Comments »

You should never try to install the conversion kit on your own. Go through instructions, stated in the manual, very vigilantly. The electric bike conversion kit works on the apparatus that generates current. This can be dangerous if done carelessly. This caution is not meant to scare you. Installing a conversion kit is pretty simple otherwise. It would not take you more than thirty minutes to install this kit. Before you start to install your electric bike conversion kit, you should always make sure that you have checked the polarity. If you swap the polarity, it can lead to heavy damage to the controller unit. The key switch is located inside the controller unit. It is the first thing that will stop functioning on swapping the polarity.

Don’t leave the battery uncharged when the bike is not in use. Remove the battery and put it on charging straight away after use. The controller unit should always be turned off prior to the installation. Try to carry out this process in a safe and fire proof region. Try to make use of insolated surrounding while installing the equipment. Even when you put the battery on charging, make sure that it is not kept near any combustible substance. Always remember that you do not need to take the dimensions of your cycle’s rim in order to find the size of the wheel. Your fork should roughly fit the standard rim of the wheel. In order to determine the wheel size, look at your cycle tire.

Share and Enjoy: